Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system is developed for the Heliotron J helical device.A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma.The system has 25 spatial points with ～10mm resolution.Two high repetition Nd:YAG lasers (>550mJ@ 50Hz) realize the measurement of the time evolution of the plasma profile with ～10ms time intervals.Scattered light is collected by a large concave mirror (D=800 mm,f/2.25) with a solid angle of ～100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form.The signal is amplified by newly designed fast preamplifiers with DC and AC output,which reduces the low frequency background noise.The signals are digitized with a multi-event QDC,fast gated integrators.The data acquisition is performed by a VME-based system operated by the CINOS.     

Combined effects of radon inhalation and antioxidant vitamin administration on acute alcohol-induced hepatopathy in mice

It has been reported that radon inhalation activates antioxidative functions in liver and has an antioxidative effect against hepatopathy similar to that of the antioxidative effects of ascorbic acid (VC) or α-tocopherol (VE). In this study, we examined the combined effects of radon inhalation and antioxidant vitamin administration on acute alcohol-induced hepatopathy in mice. ICR mice were subjected to intraperitoneal (i.p.) administration of alcohol after pretreating with air only (sham) or radon at a concentration of approximately 2000 Bq/m³ for 24 hours and i.p. administration of VC (300 mg/kg body weight) or VE (300 mg/kg body weight). In mice injected with alcohol, the combined radon and antioxidant vitamins treatment significantly decreased the activities of glutamic oxaloacetic transaminase in serum compared to not only the alcohol-administered group (sham group), but also the radon inhalation with alcohol administration group or the vitamin and alcohol administration group. In addition, radon inhalation significantly increased the antioxidant level, in such as the catalase activity and the total glutathione content in liver compared to the sham group. These results suggested that the combined radon and antioxidant vitamin treatment could effectively inhibit alcohol-induced hepatopathy in mice without any antagonizing action.     

Isolation of antimicrobial agent from the marine algae Cystoseira hakodatensis

Cystoseira hakodatensis is an unutilised brown algae belonging to family Sargassaceae. A crude methanol extract from the algae showed inhibitory effects on the growths of Bacillus cereus and Bacillus licheniformis. To isolate the major antimicrobial agent, a sequential active‐guided isolation procedure was applied: liquid–liquid extraction, column chromatography and bio‐autography. A marked antimicrobial agent (active α) was isolated in hydrophobic fraction and was determined to phenolics without carbohydrates and proteins by phytochemical test. Regarding the antimicrobial potential, the isolated active α showed better inhibitory effects against B. cereus and B. licheniformis at 2 and 4 times of lower concentrations (62.5 and 31.3 μg mL^?1) in comparison with epigallocatechin gallate. These results showed that C. hakodatensis is a potential source of antimicrobial agent capable of preventing the growth of the two bacteria.     

Combustion synthesis of AlN doped with carbon and oxygen

Carbon-and-oxygen-doped AlN specimens were prepared by combustion synthesis using Al, graphite, and AlN. Graphite addition changed the product color from white to blue. By XRD, the lattice constant increased slightly with increasing carbon content. Blue AlN powder was synthesized with a molar ratio of the diluent AlN of 0.2-0.5 with a fixed graphite content of 0.05. At an AlN molar ratio exceeding 0.6, carbon was not successfully incorporated due to the lower reaction temperature. Calcination at 800°C in air removed residual graphite without changing the crystal structure or product color. Oxygen, nitrogen, and carbon analyses revealed that blue AlN powders contained 0.45-0.54 mass% carbon and 1.4-1.6 mass% oxygen, while the undoped AlN contained 0.021 mass% carbon and 0.94 mass% oxygen. The origin of the white-to-blue color change was investigated via reflection measurements. Blue AlN exhibits an absorption peak at 634 nm (1.96 eV). From first-principles electronic structure calculations, the C-doped AlN and carbon-and-oxygen-doped AlN with a 1:1 ratio could be classified as p-type, whereas the O-doped AlN and 1:3 carbon-and-oxygen-doped AlN were n-type. One reason for the absorption peak at 634 nm may be a transition from the conduction band to an upper unoccupied state. These results suggest the possible control of optical and electronic properties of AlN via carbon-and-oxygen doping.     

Investigation of Alkali‐Ion (Li,Na, and K) Intercalation in KxVPO4F (x ∼ 0) Cathode

This work compares the intercalation of K, Na, and Li in K_xVPO₄F (x ～ 0). The K_xVPO₄F (x ～ 0) cathode delivers reversible capacities of ≈90–100 mAh g^?1 in K, Na, and Li cells, at an average voltage of ≈4.33 V for K, ≈3.98 V for Na, and ≈3.96 V for Li. This is so far the highest average voltage known for a K‐intercalation cathode. The lower voltage of Li insertion compared to Na is attributable to undercoordinated Li ions in the K_xVPO₄F (x ～ 0) framework. While the material shows high rate capability for all the alkali ions, Li migration in K_xVPO₄F (x ～ 0) is more difficult than with Na and K. This work suggests that a large cavity is not always good for insertion of alkali ions and cathode materials need to be suitably tailored to each intercalating ion species.     

Interconnection reliability and interfacial structure between Au alloy bump and Al pad using ultrasonic bonding*

Flip chip technology with Au bumps on a substrace has been widely applied to electronic equipment such as smart phones. The purposes of this study are to examine the effect of Al pad thickness on the bondability of flip chip using ultrasonic bonding and to clarify interfacial structures between Au alloy bumps and Al pads by ultrasonic bonding compared before and after a thermal cycle test. Suitable Al thickness for excellent initial Au/Al bonding without chip cracking are 0.8 μm because a thin Al layer could not reduce stress to a chip under an Al pad during the ultrasonic bonding process. Intermetallic compounds between the Au alloy bump and chip after reflows consisted of five Au-Al layers, and a pure Al layer remained. On the other hand, after the temperature cycle test at 218/423 K, intermetallic compounds between the Au alloy bump and chip were changed into two kinds of Au-Al layers, so a pure Al layer did not exist. In addition, if thick intermetallic compound layers existed around the bonding region, bondability deteriorated easily by thermal stress due to a thermal cycle test, therefore the open failure rate was rising when the Au thickness was 1.2 μm.     

A rapid-detection method for radioactive cesium in the air

We propose a method of rapidly detecting radioactive cesium floating in the air for the purpose of alerting people active in the ‘difficult-to-return zone’ of Fukushima to changes in airborne radioactivity. With this purpose in mind, we set requirement specifications and created a new system concept. The targeted detection limit was 30 Bq/m³ and the mandatory level of measurement time was 48 min with a target level of 12 min, and these periods are 10 times faster than those of conventional air monitors. The system consists of a conventional gamma-spectrometer with a novel shaped shield. The targeted peak region of the measured energy spectrum is analyzed. After the basic design and confirmation of feasibility, we perform some experiments in the normal environment of Yokohama city and the difficult-to-return zone of Fukushima. Using the results, we conducted the design improvement and performance evaluation. As a result, the system performance is found to satisfy requirements. We thus conclude that this system is a promising candidate for rapid detection of airborne radioactivity in the difficult-to-return zone of Fukushima.     

Adaptive backstepping control of wheeled inverted pendulum with velocity estimator

In this paper, we introduce a backstepping control design of a wheeled inverted pendulum. Based on a second-order motion equation of the body angle, an adaptive integral backstepping controller is designed to stabilize the body angle. It is shown that the σ-modification rule in the adaptive update law guarantees the boundedness of the errors in estimating the time-varying signal that is an output of a linear system with every bounded input signal. Then, the stabilizing controller for the wheel angle is constructed by a PD-type positive feedback. The derived controller requires the full-state measurements. In the output feedback case, the K filter or the observer backstepping is needed. However, the structure of the controller becomes complicated. We propose a non-model-based differentiator based on the adaptive update law. Since the non-model-based differentiator does not require any knowledge of the dynamic structure of the signal, we can use it as a velocity estimator for unknown nonlinear systems. Therefore, we replaced the velocity measurement with the estimates by the non-model-based differentiator. Finally, simulation results for the proposed controller are presented.     

Non-contact measurements of water jet spreading width with a laser instrument

Jet spreading width is one of the important characteristics of water jets discharging into the air. Many researchers have dealt with measuring this width, and contact measuring methods on the water jet surface were employed in a lot of the cases. In order to avoid undesirable effects caused by the contact on the jet surface, we introduce non-contact measuring methods with a laser instrument to the measurements of jet spreading width. In measurements, a transmitter emits sheet-like laser beam to a receiver. The water jet between the transmitter and the receiver interrupts the laser beam and makes a shadow. The minimum and maximum values of the shadow width are measured. In addition, pictures of the water jet are taken with a scale, and the shadow width is measured from the pictures. The experiments on various needle strokes were performed. Three kinds of width consistent with the jet structure were obtained. In the results, it can be concluded that our non-contact measuring methods are feasible. The data of jet spreading widths and jet taper were obtained and are useful for future applications.